Suitable for all car speed projectors GPS Car Speedometer Head Up Display HUD Windshield Projector HGSD-A2

Description:
Available for any car, easy to install, plug and play
Screen 3.5 inch HD display
Multi-color design makes the screen more abundant and easier to read
Nanotechnology to eliminate double reflections, more clear.
Rich content: speed, compass, speed alarm, free switch between km and miles
Auto power on / off: HUD start and stop with car start and shutdown, effective car battery protection;
save manual shift mode, easier HUD control.
Automatic and manual dimming mode, glare-free driving.
Note: This head-up display speed projector is compatible with all cars
Usage and installation for the reflective film:
Please note: HUD projects dashboard information onto the front windshield of the car because the windshield is double, which will make a double reflection on the windshield when it is running. Double reflection will be a different reason for a different windshield. If you can see the displayed information clearly, then there is no need to use reflective tape. If there is a double image, please use reflective tape.
Firstly, please place the non-slip mat on the dashboard and then place the HUD on it. Reflective film can adhere to the position right above the HUD position, which can reflect the host screen onto the windshield.

Film insertion methods:
Spray some water on the area where the film will stick and then use a dry cloth to clean it .;
Peel off the back (marked 1) of the reflective tape, then stick it to the window pane.
Once you’ve adjusted the location, you can use a scratch board or something else flat to lick off the film.
and squeeze the water inside out until there is no bubble or water in it.
Remove the protective tape (marked 2) from the reflective tape. If the film cannot display all the information,
Please adjust the non-slip mat to move the position.

Specifications:
Working voltage: DC8-18V
Working current: 40mA
Sleeping current: 15mA
Compass accuracy: ± 1 °
Speed ​​range: -400 KM
Real-time accuracy: the same as satellite
Satellite positioning time: cold start: 30s, hot start: 1s
HUD size: 88 * 53 * 13mm
12V car charger: 1000mA
HUD weight 40g
The solution to common problems: 1. HUD screen without display and power
Check the car charger cable if tight, pull down repeatedly inserted several times, check the HUD switch if on. If there is still no display, please try another car to check and analyze if the car cigarette lighter interface is bad, if it is a bad cigarette lighter, please try to connect the cable line to the car battery. 2. No speed, automatic shutdown after 5 minutes.
The default auto power-off time is 5 minutes, if there is no speed, the HUD will turn off after 5 minutes, it is a built-in vibration switch, if there is little vibration, it will turn on. 3. Inaccurate speed
When HUD is on, vertically press the wave button for 5 seconds to enter the menu items, here the menu options show 0, the parameter shows 107, up or down the wave button to increase or decrease the value according to the difference until it shows the correct one. After setting, vertical press after 5 seconds to save it. 4. HUD is not clear to see under sunlight.
Check if the host HUD screen protector is torn, and please stick the reflective film on the windshield. 5. Incorrect operation leads to failures. Or inaccurate data
Reset setting.

The package includes:
1x HUD host
1x Charger
1x Anti-swallow Mat
1x Reflected Film
1x Manual