Spy M1 Digital Tire Pressure Monitoring System

Motorcycle tire pressure check. After parking, the screen will automatically turn off in 35 seconds until the next motion detection on the motorcycle wheel is triggered, the screen will automatically open once the motorcycle starts or reaches over 20km/h.

Voltage: 12V

Operating frequency: 433.92 MHz

Unit of measurement: Bar/Psi

Measuring range: 0-50Psi/0-3.5Bar

Low-Pressure Alert: 29 Psi/2.0Bar

High-Pressure Alert: 43 Psi /3.0Bar

Display operating temperature: -20ºC ~ 70ºC

Sensor weight: 9g

Dimension: 19*16mm

Operating temperature: -20ºC to 70ºC

Sensor battery: CR1632 3.0V

Warranty: 12 months

Certifications: E-mark, CE, FCC, ISO 16949

After parking, the screen will automatically turn off in 35 seconds until the next motion detection on the motorcycle wheel is triggered, the screen will automatically open once the motorcycle starts or reaches over 20km/h.

During use, if the continuous operation time is more than 3 minutes, the brightness on the dial will automatically become semi-bright mode, press any button and the brightness of the device will turn on again.

Press the setting button for 3 seconds to enter the settings of high pressure, low pressure, high temperature and tire pressure unit.

Press the setting button and select the button at the same time for 3 seconds to enter and set the pressure you want your tires to be.

Press the selection button for 3 seconds until you hear a Beep sound, this way you reset to factory settings.

Press the selector button for 5 seconds until you hear the Beep sound 2 times and the indicator screen will turn off.

When the display is on, it shows pressure data for 50 seconds and automatically switches to show temperature data for 8 seconds, it is a cycle process.

It has a base that goes into the handlebars.

It also has a 3m self-adhesive base to fix it to a surface if you want.

It has a base that goes into the handlebars. It also has a 3m self-adhesive base to fix it to a surface if you want.